User Tools

Site Tools


u-boot_make_badref

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

u-boot_make_badref [2019/04/13 10:41] (current)
rpjday created
Line 1: Line 1:
 +===== Overview =====
  
 +This page lists everywhere in the U-Boot source code that Makefiles are testing "​CONFIG_"​ Kbuild options that do not appear to be defined in any Kconfig file.
 +
 +===== The output for the entire code base =====
 +
 +<​code>​
 +>>>>>​ ADI_GPIO2
 +./​drivers/​gpio/​Makefile:​obj-$(CONFIG_ADI_GPIO2) += adi_gpio2.o
 +>>>>>​ ALI152X
 +./​drivers/​misc/​Makefile:​obj-$(CONFIG_ALI152X) += ali512x.o
 +>>>>>​ CMD_INI
 +./​cmd/​Makefile:​obj-$(CONFIG_CMD_INI) += ini.o
 +>>>>>​ CMD_MFSL
 +./​cmd/​Makefile:​obj-$(CONFIG_CMD_MFSL) += mfsl.o
 +>>>>>​ DATAFLASH_MMC_SELECT
 +./​cmd/​Makefile:​obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o
 +>>>>>​ DB8500_GPIO
 +./​drivers/​gpio/​Makefile:​obj-$(CONFIG_DB8500_GPIO) += db8500_gpio.o
 +>>>>>​ DLVISION_10G
 +./​board/​gdsys/​common/​Makefile:​obj-$(CONFIG_DLVISION_10G) += osd.o dp501.o
 +>>>>>​ DM644X_GPIO
 +./​drivers/​gpio/​Makefile:​obj-$(CONFIG_DM644X_GPIO) += da8xx_gpio.o
 +>>>>>​ EXYNOS_PWM_BL
 +./​drivers/​video/​exynos/​Makefile:​obj-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o
 +>>>>>​ FTMAC110
 +./​drivers/​net/​Makefile:​obj-$(CONFIG_FTMAC110) += ftmac110.o
 +>>>>>​ IO64
 +./​board/​gdsys/​common/​Makefile:​obj-$(CONFIG_IO64) += miiphybb.o
 +>>>>>​ IOCON
 +./​board/​gdsys/​common/​Makefile:​obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o ch7301.o
 +>>>>>​ KALLSYMS
 +./​Makefile:​ifeq ($(CONFIG_KALLSYMS),​y)
 +./​common/​Makefile:​obj-$(CONFIG_KALLSYMS) += kallsyms.o
 +>>>>>​ LAN91C96
 +./​drivers/​net/​Makefile:​obj-$(CONFIG_LAN91C96) += lan91c96.o
 +>>>>>​ MACH_DAVINCI_DA830_EVM
 +./​board/​davinci/​da8xxevm/​Makefile:​obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o
 +>>>>>​ MW_EEPROM
 +./​drivers/​mtd/​Makefile:​obj-$(CONFIG_MW_EEPROM) += mw_eeprom.o
 +>>>>>​ NAND_FSL_UPM
 +./​drivers/​mtd/​nand/​raw/​Makefile:​obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
 +>>>>>​ NAND_KB9202
 +./​drivers/​mtd/​nand/​raw/​Makefile:​obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
 +>>>>>​ NAND_PLAT
 +./​drivers/​mtd/​nand/​raw/​Makefile:​obj-$(CONFIG_NAND_PLAT) += nand_plat.o
 +>>>>>​ NAND_SPEAR
 +./​drivers/​mtd/​nand/​raw/​Makefile:​obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 +>>>>>​ NATSEMI
 +./​drivers/​net/​Makefile:​obj-$(CONFIG_NATSEMI) += natsemi.o
 +>>>>>​ NS8382X
 +./​drivers/​net/​Makefile:​obj-$(CONFIG_NS8382X) += ns8382x.o
 +>>>>>​ NS87308
 +./​drivers/​misc/​Makefile:​obj-$(CONFIG_NS87308) += ns87308.o
 +>>>>>​ ONENAND_U_BOOT
 +./​Makefile:​ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
 +>>>>>​ P2020DS
 +./​board/​freescale/​common/​Makefile:​obj-$(CONFIG_P2020DS) += ics307_clk.o
 +>>>>>​ PINCTRL_QCA953x
 +./​drivers/​pinctrl/​ath79/​Makefile:​obj-$(CONFIG_PINCTRL_QCA953x) += pinctrl_qca953x.o
 +>>>>>​ POWER_BATTERY_TRATS
 +./​drivers/​power/​battery/​Makefile:​obj-$(CONFIG_POWER_BATTERY_TRATS) += bat_trats.o
 +>>>>>​ POWER_BATTERY_TRATS2
 +./​drivers/​power/​battery/​Makefile:​obj-$(CONFIG_POWER_BATTERY_TRATS2) += bat_trats2.o
 +>>>>>​ POWER_FG_MAX77693
 +./​drivers/​power/​mfd/​Makefile:​obj-$(CONFIG_POWER_FG_MAX77693) += fg_max77693.o
 +>>>>>​ POWER_MAX8997
 +./​drivers/​power/​pmic/​Makefile:​obj-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
 +>>>>>​ POWER_MAX8998
 +./​drivers/​power/​pmic/​Makefile:​obj-$(CONFIG_POWER_MAX8998) += pmic_max8998.o
 +>>>>>​ POWER_MUIC_MAX77693
 +./​drivers/​power/​mfd/​Makefile:​obj-$(CONFIG_POWER_MUIC_MAX77693) += muic_max77693.o
 +>>>>>​ POWER_MUIC_MAX8997
 +./​drivers/​power/​pmic/​Makefile:​obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
 +>>>>>​ POWER_PMIC_MAX77693
 +./​drivers/​power/​mfd/​Makefile:​obj-$(CONFIG_POWER_PMIC_MAX77693) += pmic_max77693.o
 +>>>>>​ RTC_AT91SAM9_RTT
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_AT91SAM9_RTT) += at91sam9_rtt.o
 +>>>>>​ RTC_DAVINCI
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_DAVINCI) += davinci.o
 +>>>>>​ RTC_DS1302
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_DS1302) += ds1302.o
 +>>>>>​ RTC_DS1306
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_DS1306) += ds1306.o
 +>>>>>​ RTC_DS1339
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_DS1339) += ds1307.o
 +>>>>>​ RTC_DS1556
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_DS1556) += ds1556.o
 +>>>>>​ RTC_DS164x
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_DS164x) += ds164x.o
 +>>>>>​ RTC_DS174x
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_DS174x) += ds174x.o
 +>>>>>​ RTC_M41T60
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_M41T60) += m41t60.o
 +>>>>>​ RTC_M41T94
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_M41T94) += m41t94.o
 +>>>>>​ RTC_M48T35A
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_M48T35A) += m48t35ax.o
 +>>>>>​ RTC_MAX6900
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_MAX6900) += max6900.o
 +>>>>>​ RTC_MX27
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_MX27) += mx27rtc.o
 +>>>>>​ RTC_RS5C372A
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_RS5C372A) += rs5c372.o
 +>>>>>​ RTC_S3C24X0
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_S3C24X0) += s3c24x0_rtc.o
 +>>>>>​ RTC_X1205
 +./​drivers/​rtc/​Makefile:​obj-$(CONFIG_RTC_X1205) += x1205.o
 +>>>>>​ S6E8AX0
 +./​drivers/​video/​Makefile:​obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
 +>>>>>​ SHA1_CHECK_UB_IMG
 +./​tools/​Makefile:​CONFIG_SHA1_CHECK_UB_IMG = y
 +./​tools/​Makefile:​hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1
 +>>>>>​ SYS_FPGA_COMMON
 +./​board/​gdsys/​common/​Makefile:​obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o
 +>>>>>​ TEST_FDTDEC
 +./​lib/​Makefile:​obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
 +>>>>>​ USB_EHCI_FARADAY
 +./​drivers/​usb/​host/​Makefile:​obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
 +>>>>>​ USB_EHCI_RMOBILE
 +./​drivers/​usb/​host/​Makefile:​obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
 +>>>>>​ USB_GADGET_FOTG210
 +./​drivers/​usb/​gadget/​Makefile:​obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 +>>>>>​ USB_OHCI_DA8XX
 +./​drivers/​usb/​host/​Makefile:​obj-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o
 +>>>>>​ USB_SL811HS
 +./​drivers/​usb/​host/​Makefile:​obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o
 +>>>>>​ USE_PLUGIN
 +./​board/​freescale/​mx7ulp_evk/​Makefile:​extra-$(CONFIG_USE_PLUGIN) :=  plugin.bin
 +>>>>>​ XWAY_SWAP_BYTES
 +./​tools/​Makefile:​CONFIG_XWAY_SWAP_BYTES = y
 +./​tools/​Makefile:​hostprogs-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes
 +</​code>​
u-boot_make_badref.txt ยท Last modified: 2019/04/13 10:41 by rpjday