User Tools

Site Tools


hierarchical_device_files

This is an old revision of the document!


Overview

How hierarachical device files with respect to Yocto Project.

beaglebone.conf

As an example, Poky's beaglebone.conf file, which specifies the creation of three related .dtb files:

...
KERNEL_IMAGETYPE = "zImage"
KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb"
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
...

The .dts files

am335x-boneblack.dts

#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
#include "am335x-boneblack-common.dtsi"

/ {
        model = "TI AM335x BeagleBone Black";
        compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};

&cpu0_opp_table {
        /*
         * All PG 2.0 silicon may not support 1GHz but some of the early
         * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
         * to support 1GHz OPP so enable it for PG 2.0 on this board.
         */
        oppnitro-1000000000 {
                opp-supported-hw = <0x06 0x0100>;
        };
};
hierarchical_device_files.1544533675.txt.gz · Last modified: 2018/12/11 13:07 by rpjday