Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ===== Overview ===== Steps in building for ZCU102 using stock YP and meta-xilinx-bsp layer. ===== Layers ===== Check out: * poky [warrior] * meta-openembedded/meta-oe [master] * meta-xilinx [master] MACHINE = "zcu102-zynqmp" ===== bblayers.conf ===== <code> BBLAYERS ?= " \ /home/rpjday/oe/dist/layers/poky/meta \ /home/rpjday/oe/dist/layers/poky/meta-poky \ /home/rpjday/oe/dist/layers/poky/meta-yocto-bsp \ /home/rpjday/oe/dist/layers/meta-openembedded/meta-oe \ /home/rpjday/oe/dist/layers/xilinx/meta-xilinx/meta-xilinx-bsp \ " </code> ===== Licensing ===== <code> README.md: LICENSE_FLAGS_WHITELIST += "xilinx_pmu-rom" README.md: LICENSE_FLAGS_WHITELIST += "xilinx" recipes-bsp/pmu-firmware/pmu-rom_2018.1.bb:LICENSE_FLAGS = "xilinx" recipes-graphics/libgles/libmali-xlnx.bb:LICENSE_FLAGS = "xilinx" </code> ===== Building ===== <code> $ bitbake --runall fetch core-image-minimal </code> meta-xilinx_and_zcu102-zynqmp.txt Last modified: 2019/11/22 08:32by rpjday