Differences

This shows you the differences between two versions of the page.

--- zed_yocto_u-boot_commands [2019/05/19 19:31] – rpjday
+++ zed_yocto_u-boot_commands [2019/05/20 13:05] (current) – rpjday
@@ Line 3: / Line 3: @@
 U-Boot commands supported by the standard Yocto/meta-xilinx-bsp build.
-===== Commands =====
+==== Informational commands =====
-==== ?       - alias for 'help' ====
+==== version ====
+<code>
+U-Boot 2018.01 (May 18 2019 - 17:11:06 +0000)
+arm-poky-linux-gnueabi-gcc (GCC) 8.2.0
+GNU ld (GNU Binutils) 2.31.1.20181224
+</code>
+==== bdinfo ====
+<code>
+arch_number = 0x00000000
+boot_params = 0x00000000
+DRAM bank   = 0x00000000
+-> start    = 0x00000000
+-> size     = 0x20000000
+baudrate    = 115200 bps
+TLB addr    = 0x1FFF0000
+relocaddr   = 0x1FF3B000
+reloc off   = 0x1BF3B000
+irq_sp      = 0x1EB1AEE0
+sp start    = 0x1EB1AED0
+ARM frequency = 666 MHz
+DSP frequency = 0 MHz
+DDR frequency = 533 MHz
+Early malloc usage: 5a4 / 600
+fdt_blob = 1ffa7fc0
+</code>
+==== coninfo ====
+<code>
+List of available devices:
+serial@e0001000 00000007 IO stdin stdout stderr
+serial   00000003 IO
+</code>
+===== More commands =====
 ==== base    - print or set address offset ====
-==== bdinfo  - print Board Info structure ====
 ==== boot    - boot default, i.e., run 'bootcmd' ====
 ==== bootd   - boot default, i.e., run 'bootcmd' ====
@@ Line 18: / Line 55: @@
 ==== clk     - CLK sub-system ====
 ==== cmp     - memory compare ====
-==== coninfo - print console devices and information ====
 ==== cp      - memory copy ====
 ==== crc32   - checksum calculation ====
@@ Line 90: / Line 126: @@
 ==== usb     - USB sub-system ====
 ==== usbboot - boot from USB device ====
-==== version - print monitor, compiler and linker version ====