Differences

This shows you the differences between two versions of the page.

--- u-boot_porting_board [2019/12/27 07:48] – [Overview] rpjday
+++ u-boot_porting_board [2019/12/27 08:55] (current) – [Existing usable content] rpjday
@@ Line 9: / Line 9: @@
 CONFIG_SYS_CPU="armv8"
 CONFIG_SYS_SOC="zynqmp"
-CONFIG_SYS_VENDOR="xilinx"
+CONFIG_SYS_VENDOR="acme"
 CONFIG_SYS_BOARD="zynqmp"
 CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp"
@@ Line 18: / Line 18: @@
 ===== Files/directories =====
-Some of the following will already exist for generic ZynqMP content; use existing files from some other ZynqMP-based board as the starting point for new Coyote-related content:
+Some of the following will already exist for generic ZynqMP content; use existing files from some other ZynqMP-based board as the starting point for new Coyote-related content.
+==== Existing usable content ====
-  * ''configs/''
-    * ''acme_zynqmp_coyote_rev1_0_defconfig''
   * ''include/''
     * ''configs/''
       * ''xilinx_zynqmp.h''
   * ''arch/''
     * ''arm/''
@@ Line 30: / Line 32: @@
       * ''Makefile''
       * ''mach-zynqmp/''
-  * board/
-    * xilinx/
-      * zynq/
-        * Kconfig
-        * Makefile
-        * board.c
-        * cmds.c
-        * zynq-zed/
-      * common/
-        * board.c
-==== mach-zynqmp/ ====
+==== New Coyote board content ====
+  * ''configs/''
+    * ''acme_zynqmp_coyote_rev1_0_defconfig''
+  * ''board/''
+    * ''acme/''
+      * ''Kconfig''
+      * ''common/''
+        * ''board.c''
+      * ''zynqmp/''
+        * ''Kconfig''
+        * ''Makefile''
+        * ''zynqmp.c''   [aka board.c]
+        * ''cmds.c''
+        * ''zynqmp-coyote-rev1.0/''
+          * ''psu_init_gpl.c''