Differences

This shows you the differences between two versions of the page.

--- petalinux_2019.2_zcu102_project_structure [2019/11/07 11:38] – rpjday
+++ petalinux_2019.2_zcu102_project_structure [2019/11/07 12:18] (current) – [recipes-apps/] rpjday
@@ Line 34: / Line 34: @@
 ==== config ====
+<code>
+#
+# Automatically generated file; DO NOT EDIT.
+# linux System Configuration
+#
+CONFIG_SUBSYSTEM_TYPE_LINUX=y
+CONFIG_SYSTEM_ZYNQMP=y
+#
+# linux Components Selection
+#
+CONFIG_SUBSYSTEM_COMPONENT_DEVICE__TREE_NAME_DEVICE__TREE__GENERATOR=y
+CONFIG_SUBSYSTEM_COMPONENT_BOOTLOADER_AUTO_FSBL=y
+CONFIG_SUBSYSTEM_COMPONENT_BOOTLOADER_AUTO_PS_INIT=y
+CONFIG_SUBSYSTEM_COMPONENT_BOOTLOADER_NAME_ZYNQMP_FSBL=y
+CONFIG_SUBSYSTEM_COMPONENT_U__BOOT_NAME_U__BOOT__PLNX=y
+# CONFIG_SUBSYSTEM_COMPONENT_U__BOOT_NAME_REMOTE is not set
+# CONFIG_SUBSYSTEM_COMPONENT_U__BOOT_NAME_NONE is not set
+CONFIG_SUBSYSTEM_COMPONENT_ARM__TRUSTED__FIRMWARE_NAME_ATF=y
+# CONFIG_SUBSYSTEM_COMPONENT_ARM__TRUSTED__FIRMWARE_NAME_REMOTE is not set
+# CONFIG_SUBSYSTEM_COMPONENT_ARM__TRUSTED__FIRMWARE_NAME_NONE is not set
+CONFIG_SUBSYSTEM_COMPONENT_LINUX__KERNEL_INSTANCE_KERNEL_NAME_XLNX__4___4=y
+# CONFIG_SUBSYSTEM_COMPONENT_LINUX__KERNEL_INSTANCE_KERNEL_NAME_REMOTE is not set
+CONFIG_SUBSYSTEM_COMPONENT_ROOTFS_NAME_PETALINUX__ROOTFS=y
+#
+# Generic Components
+#
+#
+# Auto Config Settings
+#
+CONFIG_SUBSYSTEM_AUTOCONFIG_DEVICE__TREE=y
+# CONFIG_SUBSYSTEM_DEVICE_TREE_MANUAL_INCLUDE is not set
+CONFIG_SUBSYSTEM_DEVICE_TREE_INCLUDE_DIR="${STAGING_KERNEL_DIR}/include"
+CONFIG_SUBSYSTEM_AUTOCONFIG_KERNEL=y
+CONFIG_SUBSYSTEM_AUTOCONFIG_ROOTFS=y
+CONFIG_SUBSYSTEM_AUTOCONFIG_U__BOOT=y
+CONFIG_SUBSYSTEM_HARDWARE_AUTO=y
+CONFIG_SUBSYSTEM_PROCESSOR_PSU_CORTEXA53_0_SELECT=y
+CONFIG_SUBSYSTEM_ARCH_AARCH64=y
+#
+# Memory Settings
+#
+CONFIG_SUBSYSTEM_MEMORY_PSU_DDR_0_BANKLESS_SELECT=y
+# CONFIG_SUBSYSTEM_MEMORY_SIMPLE_SELECT is not set
+# CONFIG_SUBSYSTEM_MEMORY_MANUAL_SELECT is not set
+CONFIG_SUBSYSTEM_MEMORY_PSU_DDR_0_BANKLESS_BASEADDR=0x0
+CONFIG_SUBSYSTEM_MEMORY_PSU_DDR_0_BANKLESS_SIZE=0x100000000
+CONFIG_SUBSYSTEM_MEMORY_PSU_DDR_0_BANKLESS_U__BOOT_TEXTBASE_OFFSET=0x100000
+#
+# Serial Settings
+#
+# CONFIG_SUBSYSTEM_SERIAL_PSU_UART_1_SELECT is not set
+CONFIG_SUBSYSTEM_SERIAL_PSU_UART_0_SELECT=y
+# CONFIG_SUBSYSTEM_SERIAL_MANUAL_SELECT is not set
+# CONFIG_SUBSYSTEM_SERIAL_PSU_UART_0_BAUDRATE_9600 is not set
+# CONFIG_SUBSYSTEM_SERIAL_PSU_UART_0_BAUDRATE_19200 is not set
+# CONFIG_SUBSYSTEM_SERIAL_PSU_UART_0_BAUDRATE_38400 is not set
+# CONFIG_SUBSYSTEM_SERIAL_PSU_UART_0_BAUDRATE_57600 is not set
+CONFIG_SUBSYSTEM_SERIAL_PSU_UART_0_BAUDRATE_115200=y
+# CONFIG_SUBSYSTEM_SERIAL_PSU_UART_0_BAUDRATE_230400 is not set
+#
+# Ethernet Settings
+#
+CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_SELECT=y
+# CONFIG_SUBSYSTEM_ETHERNET_MANUAL_SELECT is not set
+# CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_MAC_AUTO is not set
+CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_MAC="00:0a:35:00:22:01"
+CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_USE_DHCP=y
+#
+# Flash Settings
+#
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_SELECT=y
+# CONFIG_SUBSYSTEM_FLASH_MANUAL_SELECT is not set
+# CONFIG_SUBSYSTEM_FLASH__ADVANCED_AUTOCONFIG is not set
+#
+# partition 0
+#
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART0_NAME="boot"
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART0_SIZE=0x100000
+#
+# partition 1
+#
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART1_NAME="bootenv"
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART1_SIZE=0x40000
+#
+# partition 2
+#
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART2_NAME="kernel"
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART2_SIZE=0x1600000
+#
+# partition 3
+#
+CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART3_NAME=""
+#
+# SD/SDIO Settings
+#
+CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_0_SELECT=y
+# CONFIG_SUBSYSTEM_SD_MANUAL_SELECT is not set
+#
+# RTC Settings
+#
+CONFIG_SUBSYSTEM_RTC_PSU_RTC_SELECT=y
+# CONFIG_SUBSYSTEM_RTC_MANUAL_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG=y
+#
+# boot image settings
+#
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_BOOT_MEDIA_FLASH_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_BOOT_MEDIA_SD_SELECT=y
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_BOOT_MEDIA_MANUAL_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_BOOT_IMAGE_NAME="BOOT.BIN"
+#
+# u-boot env partition settings
+#
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_BOOTENV_MEDIA_FLASH_SELECT=y
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_BOOTENV_MEDIA_MANUAL_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_BOOTENV_PART_NAME="bootenv"
+#
+# kernel image settings
+#
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_KERNEL_MEDIA_FLASH_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_KERNEL_MEDIA_SD_SELECT=y
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_KERNEL_MEDIA_ETHERNET_SELECT is not set
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_KERNEL_MEDIA_MANUAL_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_KERNEL_IMAGE_NAME="image.ub"
+#
+# jffs2 rootfs image settings
+#
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_JFFS2_MEDIA_FLASH_SELECT=y
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_JFFS2_MEDIA_MANUAL_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_JFFS2_PART_NAME="jffs2"
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_JFFS2_IMAGE_NAME="rootfs.jffs2"
+#
+# dtb image settings
+#
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_DTB_MEDIA_BOOTIMAGE_SELECT=y
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_DTB_MEDIA_FLASH_SELECT is not set
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_DTB_MEDIA_SD_SELECT is not set
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_DTB_MEDIA_ETHERNET_SELECT is not set
+# CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_DTB_MEDIA_MANUAL_SELECT is not set
+CONFIG_SUBSYSTEM_IMAGES_ADVANCED_AUTOCONFIG_DTB_IMAGE_NAME="system.dtb"
+CONFIG_SUBSYSTEM_ENDIAN_LITTLE=y
+CONFIG_SUBSYSTEM_BOOTARGS_GENERATED="earlycon clk_ignore_unused"
+#
+# ARM Trusted Firmware Compilation Configuration
+#
+CONFIG_SUBSYSTEM_ATF_COMPILE_EXTRA_SETTINGS=""
+#
+# u-boot Configuration
+#
+CONFIG_SUBSYSTEM_UBOOT_CONFIG_PETALINUX=y
+CONFIG_SUBSYSTEM_UBOOT_CONFIG_TARGET="xilinx_zynqmp_zcu102_rev1_0_defconfig"
+CONFIG_SUBSYSTEM_NETBOOT_OFFSET=0x10000000
+CONFIG_SUBSYSTEM_U__BOOT_TFTPSERVER_IP="AUTO"
+#
+# Image Packaging Configuration
+#
+CONFIG_SUBSYSTEM_ROOTFS_INITRAMFS=y
+# CONFIG_SUBSYSTEM_ROOTFS_INITRD is not set
+# CONFIG_SUBSYSTEM_ROOTFS_JFFS2 is not set
+# CONFIG_SUBSYSTEM_ROOTFS_NFS is not set
+# CONFIG_SUBSYSTEM_ROOTFS_EXT is not set
+# CONFIG_SUBSYSTEM_ROOTFS_OTHER is not set
+CONFIG_SUBSYSTEM_UIMAGE_NAME="image.ub"
+# CONFIG_SUBSYSTEM_UIMAGE_HASH_NONE is not set
+CONFIG_SUBSYSTEM_UIMAGE_HASH_CRC32=y
+# CONFIG_SUBSYSTEM_UIMAGE_HASH_SHA1 is not set
+# CONFIG_SUBSYSTEM_UIMAGE_HASH_BOTH is not set
+CONFIG_SUBSYSTEM_COMPRESS_IMAGE=y
+CONFIG_SUBSYSTEM_DTB_PADDING_SIZE=0x1000
+CONFIG_SUBSYSTEM_COPY_TO_TFTPBOOT=y
+CONFIG_SUBSYSTEM_TFTPBOOT_DIR="/tftpboot"
+#
+# Firmware Version Configuration
+#
+CONFIG_SUBSYSTEM_HOSTNAME="zcu102"
+CONFIG_SUBSYSTEM_PRODUCT="zcu102"
+CONFIG_SUBSYSTEM_FW_VERSION="1.00"
+CONFIG_SUBSYSTEM_MACHINE_NAME="template"
+#
+# Yocto Settings
+#
+CONFIG_TMP_DIR_LOCATION="${PROOT}/build/tmp"
+CONFIG_PRE_MIRROR_URL="http://petalinux.xilinx.com/sswreleases/rel-v${PETALINUX_VER%%.*}/downloads"
+CONFIG_YOCTO_NETWORK_SSTATE_FEEDS_URL="http://petalinux.xilinx.com/sswreleases/rel-v${PETALINUX_VER%%.*}/aarch64/sstate-cache"
+</code>
 ==== rootfs_config ====
@@ Line 93: / Line 300: @@
 ==== recipes-apps/ ====
-  * gpio-demo
+  * gpio-demo/
-  * peekpoke
+  * peekpoke/
 ==== recipes-bsp ====